Logo
Doprava do: CZ

Přihlásit se
Stav objednávky

MET Roam MIPS cyklistická helma

Úspěšně testováno
vč. 21% DPH Doprava zdarma do CZplus přepravní náklady.
Množství
PŘIDAT DO NÁKUPNÍHO KOŠÍKU
Pouze online a Click & Collect
V současné době je k dispozici v obchodě Kronberg
Číslo výrobku
Výrobce-č.výrobku
Varianty
Číslo výrobku výrobce na displeji
velikost S (52-56cm) kiwi iridescent/matt 93649198 85,65€
Číslo výrobku výrobce
velikost S (52-56cm) stromboli black/matt glossy 93641936 85,65€
Číslo výrobku výrobce 3HM115S0NO1
velikost M (56-58cm) stromboli black/matt glossy 93641937 156,45€
Číslo výrobku výrobce 3HM115M0NO1
Vyberte variantu.

The half-shell helmet for enduro and trail bikers

The MET Roam with MIPS technology for all-mountain riders and enduro pilots. Regardless of whether you ride enduro or e-MTB, special protection in the event of an impact is practically indispensable. The MIPS-C2® brain protection system effectively dissipates the rotational forces that occur in the event of a fall from the head.

highlights

  • The MIPS-C2® technology separates the shell and the liner with a thin layer of plastic called the Low Friction Layer (LFL). Thanks to this LFL, which is attached with four rubber elastomers, the helmet floats on the head and effectively diverts the rotational forces that occur in the event of a fall from the head
  • With three visor positions, the MET Roam Mips is suitable for all glasses and goggles available on the market
  • Thanks to the goggle clips on the visor and a gogglestrap guide in the rear area of the helmet, the MET Roam MIPS is compatible with all commercially available glasses and goggles
  • The injection molded visor is designed to be flexible so it won't break in the event of a crash and helps direct damaging rotational forces away from the neck
  • A specially milled channel in the EPS shell under the upper ventilation openings ensures perfect compatibility between the straps of action cam mounts and the padding in the helmet
  • 20 ventilation openings and a sophisticated system of ventilation channels in the inner shell ensure optimal airflow through the entire helmet
  • The back of the head and the temples are extremely sensitive areas and require special protection. That's why MET increased the coverage of these areas without adding unnecessary weight
  • The inner pad has an increased contact surface on the head due to the connections between the soft pads. In this way, it ensures stability without impairing the airflow in the helmet

specification

specification description
area of application All mountain, enduro, trail
MIPS Yes
Material outer shell In mold polycarbonate
Material inner shell EPS inner shell
ventilation openings 22
helmet pads Removable and washable
adjustment system Safe-T Orbital
head circumference 52 - 56 cm (size S) / 56 - 58 cm (size M) / 58 - 61 cm (size L)
weight approx. 340g / approx. 360g / approx. 395g

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

Safe-T Orbital Adjustment System
A 360° rotating headband can be adjusted to four vertical positions and two horizontal positions. Particularly suitable for braid wearers.

scope of delivery

  • 1 x MET Roam MIPS helmet (see item description for details)

product video

Test verdict

Test result: “Good” in Fahrrad 10/2023 (p. 78)

The half-shell helmet for enduro and trail bikers

The MET Roam with MIPS technology for all-mountain riders and enduro pilots. Regardless of whether you ride enduro or e-MTB, special protection in the event of an impact is practically indispensable. The MIPS-C2® brain protection system effectively dissipates the rotational forces that occur in the event of a fall from the head.

highlights

  • The MIPS-C2® technology separates the shell and the liner with a thin layer of plastic called the Low Friction Layer (LFL). Thanks to this LFL, which is attached with four rubber elastomers, the helmet floats on the head and effectively diverts the rotational forces that occur in the event of a fall from the head
  • With three visor positions, the MET Roam Mips is suitable for all glasses and goggles available on the market
  • Thanks to the goggle clips on the visor and a gogglestrap guide in the rear area of the helmet, the MET Roam MIPS is compatible with all commercially available glasses and goggles
  • The injection molded visor is designed to be flexible so it won't break in the event of a crash and helps direct damaging rotational forces away from the neck
  • A specially milled channel in the EPS shell under the upper ventilation openings ensures perfect compatibility between the straps of action cam mounts and the padding in the helmet
  • 20 ventilation openings and a sophisticated system of ventilation channels in the inner shell ensure optimal airflow through the entire helmet
  • The back of the head and the temples are extremely sensitive areas and require special protection. That's why MET increased the coverage of these areas without adding unnecessary weight
  • The inner pad has an increased contact surface on the head due to the connections between the soft pads. In this way, it ensures stability without impairing the airflow in the helmet

specification

specification description
area of application All mountain, enduro, trail
MIPS Yes
Material outer shell In mold polycarbonate
Material inner shell EPS inner shell
ventilation openings 22
helmet pads Removable and washable
adjustment system Safe-T Orbital
head circumference 52 - 56 cm (size S) / 56 - 58 cm (size M) / 58 - 61 cm (size L)
weight approx. 340g / approx. 360g / approx. 395g

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

Safe-T Orbital Adjustment System
A 360° rotating headband can be adjusted to four vertical positions and two horizontal positions. Particularly suitable for braid wearers.

scope of delivery

  • 1 x MET Roam MIPS helmet (see item description for details)

product video

Test verdict

Test result: “Good” in Fahrrad 10/2023 (p. 78)

The half-shell helmet for enduro and trail bikers

The MET Roam with MIPS technology for all-mountain riders and enduro pilots. Regardless of whether you ride enduro or e-MTB, special protection in the event of an impact is practically indispensable. The MIPS-C2® brain protection system effectively dissipates the rotational forces that occur in the event of a fall from the head.

highlights

  • The MIPS-C2® technology separates the shell and the liner with a thin layer of plastic called the Low Friction Layer (LFL). Thanks to this LFL, which is attached with four rubber elastomers, the helmet floats on the head and effectively diverts the rotational forces that occur in the event of a fall from the head
  • With three visor positions, the MET Roam Mips is suitable for all glasses and goggles available on the market
  • Thanks to the goggle clips on the visor and a gogglestrap guide in the rear area of the helmet, the MET Roam MIPS is compatible with all commercially available glasses and goggles
  • The injection molded visor is designed to be flexible so it won't break in the event of a crash and helps direct damaging rotational forces away from the neck
  • A specially milled channel in the EPS shell under the upper ventilation openings ensures perfect compatibility between the straps of action cam mounts and the padding in the helmet
  • 20 ventilation openings and a sophisticated system of ventilation channels in the inner shell ensure optimal airflow through the entire helmet
  • The back of the head and the temples are extremely sensitive areas and require special protection. That's why MET increased the coverage of these areas without adding unnecessary weight
  • The inner pad has an increased contact surface on the head due to the connections between the soft pads. In this way, it ensures stability without impairing the airflow in the helmet

specification

specification description
area of application All mountain, enduro, trail
MIPS Yes
Material outer shell In mold polycarbonate
Material inner shell EPS inner shell
ventilation openings 22
helmet pads Removable and washable
adjustment system Safe-T Orbital
head circumference 52 - 56 cm (size S) / 56 - 58 cm (size M) / 58 - 61 cm (size L)
weight approx. 340g / approx. 360g / approx. 395g

Technologies used

In this chapter we explain the technologies that the manufacturer uses in this product.

MIPS
The MIPS® safety system was developed to provide additional protection for helmets in numerous accidents. In certain impact situations, the MIPS system can reduce dangerous forces that might otherwise be transmitted to the helmet wearer's head.

1. Conventional helmets are designed and tested for a straight impact. In most cases, however, the impact is at an angle, which can cause rotational movements for the head.

2. This rotational movement can cause brain injury.

3. The low-friction shell is designed to help reduce rotational movement of the head in certain cases of angled impact.

Straight impact - oblique impact

The brain is typically more sensitive to rotational movement than linear movement because it has a shear strength similar to that of water or gel. When rotational movement causes different parts of the brain to move at different times, the tissues can be stretched, causing concussions or other brain injuries.

Rotational motion is a common cause of concussion and more serious brain injury from an oblique impact to the head. The MIPS system consists of a low-friction shell that is fixed inside the helmet. The low-friction shell is designed to slide slightly inside the helmet in the event of an accident, allowing forces to be directed away from the head. It is said to help reduce the risk of brain injuries.

Most conventional helmets are designed for a straight impact, but in most cases the impact is at an angle. The low-friction shell can reduce the rotational forces of an oblique impact.

Security system with the brain as a model

Unlike conventional helmets, which are primarily designed and tested for a straight impact, the low-friction shell of the MIPS system mimics the brain's own protection system against rotational movement. The cerebrospinal fluid is our natural defense system that allows the brain to move offset to the skull.

Safe-T Orbital Adjustment System
A 360° rotating headband can be adjusted to four vertical positions and two horizontal positions. Particularly suitable for braid wearers.

scope of delivery

  • 1 x MET Roam MIPS helmet (see item description for details)

product video

Test verdict

Test result: “Good” in Fahrrad 10/2023 (p. 78)

MET Roam MIPS cyklistická helma velikost S (52-56cm) kiwi iridescent/matt
MET Roam MIPS cyklistická helma velikost S (52-56cm) stromboli black/matt glossy
V současné době nabízíme tyto Manufacturer Info jen v česky

Über die Marke MET

Cenový alarm!
Chybička se vloudila?
Platí naše obchodní podmínky.
AJAX Loader Icon